Raven SCS 460 Installation & Service Manual page 19

5) Display C-Sd (Standard Valve), C-F (Fast Valve), or C-FC (Fast Close Valve).
a) Depressing momentarily
b) Depressing momentarily
c) Depressing momentarily
6) Selecting C-Sd, C-F, or C-FC.
a) To select C-Sd, C-F, or C-FC, step
b) Momentarily depress
7) Definition of Boom Calibration keys.
Depressing this key displays selected boom number in DATA display.
EXAMPLE: Boom 1 will be displayed as b-01.
Depressing this key after selecting BOOM CAL changes the boom number.
EXAMPLE: b-01 will change to b-02.
Depressing this key after selecting BOOM CAL changes the boom number.
EXAMPLE: b-02 will change to b-01.
Enter Boom Data:
a) Select boom b-01.
b) Use boom width as calculated under "CALCULATING BOOM CAL".
c) If a boom is not needed, enter a "0" for the length.
8) Enter SPEED CAL as calculated under "CALCULATING SPEED CAL" in key labelled
9) Enter METER CAL calibration number in key labelled
10) Enter VALVE CAL calibration number in key labelled
11) Enter RATE 1 CAL (lbs/acre) [Kg/ha] target application rate in key labelled
12) Enter RATE 2 CAL (lbs/acre) [Kg/ha] target application rate in key labelled
(If you do not use a second rate, enter the same rate as RATE 1 CAL).
steps the DATA display from C-Sd to C-F.
steps the DATA display from C-F to C-FC.
steps the DATA display from C-FC to C-Sd.
until desired code is displayed.
, the DATA display will now display "0".
15
.
.
.