Raven SCS 460 Installation & Service Manual page 21

1) Enter TIME
A) Select TIME
B) Enter TIME when RATE display shows "TInE".
NOTE: This is a 24 hour clock.
hours.
13:30 in the keyboard.
2) Enter MONTH
A) Select MONTH
B) Enter MONTH when RATE display shows "OnTH".
3) Enter DAY
A) Select DAY
B) Enter DAY when RATE display shows "dAY"
4) Enter YEAR
A) Select YEAR
B) Enter YEAR when RATE display shows "YEAr"
POWER DOWN FEATURE
5)
If the Console is not used for 10 days, it will go into a power down (low power)
mode of operation.
clock will reset to 0:00.
be changed by the user.
A) Enter POWER DOWN
1)
2)
Thus, 8:30 a.m. is entered as 8:30, but 1:30 p.m. is entered as
In this mode, all data will be retained, but the time of day
The delay time is initially set at 10 days, but can
Select POWER DOWN
Enter POWER DOWN when RATE display shows "Pdn".
Therefore, all time after 12:59 p.m., add 12
17