Console Features - Raven SCS 460 Installation & Service Manual

CONSOLE FEATURES

IMPORTANT: This Console requires selection of US (acres), SI [hectares], or TU
{1,000 sq. ft.} area; SP1 (wheel drive, etc.) or SP2 (radar) speed sensor; and
C-Sd (Standard Valve), C-F (Fast Valve), or C-FC (Fast Close Valve).
063-XXXX-XXX
CE -Use like you do the CE key on a
calculator. This key is also used
to select the features listed in
IMPORTANT box above.
Displays actual rate of application
and error messages.
CALIBRATION KEYS -- Used to enter data into the
Console to calibrate the system.
BOOM CAL -- Length of Boom.
number by using the
UP/DOWN arrow keys.
SPEED CAL -- Determined by Speed Sensor
METER CAL -- Meter Calibration Number
VALVE CAL -- Valve Response Time
RATE 1 CAL -- Target Application Rate
RATE 2 CAL -- Target Application Rate
TIME -- 24 Hour Clock (Military Time)
Console Revision can be determined by the
letter stamped in REV box on label.
Console Program can be determined by the
letter stamped in PGM box on label.
POWER -Turns Console OFF or ON.
Console OFF does not affect data stored.
Selects manual or fully automatic control.
Manual override control provides capability
for spot applications.
ENTER -Used only to enter data into
the Console.
Displays function and calibration
data.
FUNCTION KEYS
Select Boom TOTAL AREA
TOTAL VOLUME
FIELD AREA
FIELD VOLUME
DISTANCE
SPEED
VOL/MIN
DATA MENU
8
Turning
-- Used to Display Data
-- Total Area Applied
-- Total Volume Applied
-- Field Area Applied
-- Volume Applied to Field
-- Distance Traveled
-- Speed of Vehicle
-- Volume Per Minute
-- Printer Option