Decreasing The Set Vehicle Target Speed; Accelerating Temporarily - Subaru Forester 2020 Owner's Manual

●

Decreasing the set vehicle target speed

Using the RES/SET switch
While driving with Adaptive Cruise Control on, operate the RES/SET switch as follows.
• Push to the "SET/-" side briefly.
Every time the switch is pushed, the set
vehicle target speed will decrease to the
next 5 mph (5 km/h) decrement.
• Push to the "SET/-" side continuously.
While the switch is being pushed, the set
vehicle target speed will decrease in decre-
ments of 1 mph (1 km/h).
When operating the switch, the set vehicle
target speed changes on the combination
meter display.
Using the brake pedal
1. Depress the brake pedal to decrease the vehicle speed. Adaptive Cruise Control will be
canceled and
2. When the desired speed is reached, press the RES/SET switch to the "SET/-" side. The
speed at the time of pressing the switch will be set as the new vehicle speed, and it
appears on the EyeSight display area.
●

Accelerating temporarily

Depress the accelerator pedal to accelerate temporarily.
When the accelerator pedal is released, the vehicle returns to the set vehicle speed.
When the driver accelerates the vehicle by depressing the acceleration pedal while the
Adaptive Cruise Control is operating,
When the acceleration is completed,
green.
(Adaptive Cruise Control indicator) changes from green to white.
Advanced Adaptive Cruise Control
(Adaptive Cruise Control indicator) turns white.
(Adaptive Cruise Control indicator) returns to
S03396
59