How To Use Adaptive Cruise Control; Setting Adaptive Cruise Control; Setting Adaptive Cruise Control To Standby Status - Subaru Forester 2020 Owner's Manual

Advanced Adaptive Cruise Control

■ How to use Adaptive Cruise Control

●

Setting Adaptive Cruise Control

(1) Setting Adaptive Cruise Control to standby status

Press the
(white), your vehicle indicator and the following distance setting indicator are displayed
on the EyeSight display area of the combination meter display.
The set vehicle speed display will read "- - MPH (- - - km/h)".
If the switch is pressed once more, the EyeSight display will turn off. It will also automat-
ically turn off when the engine is stopped.
To set the ready status:
Adaptive Cruise Control can be activated
when all of the following conditions are
met and
played on the EyeSight display area.
- All doors (except the rear gate) are
closed.
- The driver's seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the
- The brake pedal is not depressed while driving or the brake pedal is strongly
depressed while stopping.
52
(CRUISE) switch. At this time,
S03393
(READY indicator) is dis-
D or
(Adaptive Cruise Control indicator)
Following
distance
setting
indicator
Adaptive
Cruise
Control
indicator
(white)
READY
indicator
M position.
S03110
S03028