Switch To Conventional Cruise Control; To Set The Ready Status - Subaru Forester 2020 Owner's Manual

Conventional Cruise Control

(2) Switch to Conventional Cruise Control.

Press and hold the
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Con-
trol. A notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
(white) is displayed.

To set the ready status:

Conventional Cruise Control can be activated when all of the following conditions are
met and
- All doors (except the rear gate) are
closed.
- The driver's seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the
tion.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned
significantly in either direction.
- The X-MODE is not turned on (the X-MODE indicator goes off). (if equipped)
- The vehicle speed is between approximately 20 mph (30 km/h) and 90 mph (145
km/h).
110
/ (Following distance setting) switch for approximately 2
S03397
(READY indicator) is displayed on the EyeSight display area.
or
D
(Conventional Cruise Control indicator)
Conven-
tional
Cruise
Control
indicator
(white)
posi-
M
READY
indicator
S03210
S03059