Installation - Siemens SINAMICS S120 Equipment Manual

11.3.5

Installation

Required tools:
• Torx screwdriver T20
• Flat-bladed screwdriver 1 (0.5 – 3.5)
Table 11-13 Installing the DC link adapter for a 150 mm module
Unlock and open the protective cover.
Secure the adapter (1.8 Nm).
Note:
By moving the adapter housing, the DC link adapter can be fitted on either the left-hand or
right-hand side of the module. This is possible with Active Line Modules as of 55 kW; refer to
the overview below.
Table 11-14 Overview
Active Line Module
55 kW
80 kW
120 kW
Equipment Manual Booksize Cold-Plate Power Sections
Manual, (GH4), Edition 06.2005, 6SL3097-2AJ00-0BP2
Unscrew the screws.
The 24 V adapter is installed
and the protective cover is closed.
With cold-plate cooling
6SL3136-7TE25-5AA1
6SL3136-7TE25-5AA1
6SL3136-7TE31-2AA1
Options
11.3 DC link adapter
11-25