Sample Setup: Cold Plate With External Air Heat Sink - Siemens SINAMICS S120 Equipment Manual

Booksize power sections cold plate
Hide thumbs Also See for SINAMICS S120:
Table of Contents

Advertisement

Cold plate with external air heat sinks
2.2 Example: cold plate with external air heat sink
2.2.2

Sample setup: cold plate with external air heat sink

This chapter provides an example to illustrate the setup of a cabinet drive line-up in which
the power sections are cooled by means of a cold plate with an external air heat sink.
Example:
Four single motor modules and a control supply module are installed next to a line module
with 36 kW. Each power section and its cold plate are screwed onto the external air heat
sink.
Front view of cabinet
Figure 2-1
Example: cabinet setup with powers ections, cold plate, and external air heat sink
2-2
Equipment Manual Booksize Cold-Plate Power Sections
Manual, (GH4), Edition 06.2005, 6SL3097-2AJ00-0BP2

Advertisement

Table of Contents
loading

Table of Contents