Table of Contents
Advertisement
2 Engineering
2.2 LED (SmartWire-DT diagnostics LED)
2.2 LED (SmartWire-DT diagnostics LED)
2.3 1-0-A switch
14
Table 2:
Status of the SmartWire-DT diagnostics LED
Color
Status
Orange
continuous light
flashing
Green
continuous light
flashing (1 Hz)
fast flashing (3 Hz)
The 1-0-A switch's positions are as follows:
•
1: Variable frequency drive is activated
•
0: Variable frequency drive deactivated
•
A: switching command via SmartWire-DT
￫
Intermediate positions are not permitted and lead to standstill
and an error message.
DX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com
Status signal
Switching command for variable frequency drive via SmartWire-DT
Switching command active, diagnostics available
Device is ready, error-free
• addressing process in progress
•
after gateway/control section power On
•
after actuation of the configuration button on the
gateway/control section
• Module not in current configuration
• invalid type
Incorrect position of the 1-0-A-switch
Advertisement
Table of Contents
