Maintenance And Inspection; Storage; Service And Warranty; Disposal - Eaton PowerXL DX-NET-SWD Manual

1.4 Maintenance and inspection

1.5 Storage

1.6 Service and warranty

1.7 Disposal

￫
The SmartWire-DT interface card DX-NET-SWD3 is not a house-
hold appliance, it is a component only intended to be used for
commercial purposes.
￫
Observe the technical data and connection requirements
described in this manual. Any other usage constitutes improper
use.
Observing the general rated operational data and when considering the spe-
cific technical data, the SmartWire-DT interface card SWD3 is maintenance-
free. However, external factors can influence the components's lifespan and
function.
A replacement or repairing of the SmartWire-DT interface card SWD3 is not
intended. If the card is damaged by external influences, repair is not possible.
If the SmartWire-DT interface card DX-NET-SWD3 is stored before use,
suitable ambient conditions must be ensured at the site of storage:
• Storage temperature: -40 - +85 °C,
• Relative average air humidity: < 95 %, no condensation permitted.
Contact your local sales partner if you have a problem with your Eaton
SmartWire-DT interface card SWD3.
When you call, have following data ready:
• the exact part no. (= DX-NET-SWD3),
• the date of purchase,
• an accurate description of the problem that has occurred in conjunction
with the SmartWire-DT interface card DX-NET-SWD3.
Information concerning the guarantee can be found in the Terms and
Conditions Eaton Industries GmbH.
24-hour hotline: +49 (0)1805 223 822
Email:
AfterSalesEGBonn@Eaton.com
The SmartWire-DT interface card DX-NET-SWD3 can be disposed of as elec-
tronic scrap in accordance with the currently applicable national guidelines.
Dispose of the device according to the applicable environmental laws and
provisions for the disposal of electrical or electronic devices.
DX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com
1 Device series
1.4 Maintenance and inspection
11