Interoperability; Gateways; Fieldbus Description Files; Swd-Assist - Eaton PowerXL DX-NET-SWD Manual

2.4 Interoperability

2.4.1 Gateways

2.4.2 Fieldbus description files

2.4.3 SWD-Assist

The following and later firmware versions of the SmartWire-DT gateways
ensure interoperability with SmartWire-DT interface card DX-NET-SWD3:
Table 3: Firmware versions of SmartWire-DT gateways
SmartWire-DT gateway
EU5C-SWD-CAN
EU5C-SWD-DP
￫
The firmware of the SmartWire-DT gateway can be updated
using the SWD-Assist program. This program, as well as the
required firmware versions, can be downloaded for free on the
Internet at:
http://downloadcenter.moeller.net
The SmartWire-DT interface card DX-NET-SWD3 interoperability is guaran-
teed with the following versions (and later versions) of the fieldbus descrip-
tion files for the corresponding gateway:
Table 4: Compatible field bus description files
SmartWire-DT gateway
EU5C-SWD-CAN
EU5C-SWD-DP (Intel-based CPU)
EU5C-SWD-DP (Motorola-based CPU)
SWD master (i. e. XV100)
￫
These and other fieldbus description files can be found on the
Internet at:
The SWD-Assist program provides valuable support in the engineering of
your SmartWire-DT topology. SWD-Assist is software that runs under opera-
ting systems Windows 2000 (SP 4), Windows XP, Windows Vista (32-bit) or
Windows 7 and relieves you of the planning work required for an SWD
topology.
The SmartWire-DT interface card DX-NET-SWD3 can be used in the software
SmartWire-DT Assist from software version V 1.80.
DX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com
Firmware Version
V 1.20
V 1.20
Description file
from EU5C-SWD-CAN_V130.eds
from Moed14.gsd (V. 1.08)
from MoeId14.gsd (V. 1.08)
from V.1.02
http://downloadcenter.moeller.net
2 Engineering
2.4 Interoperability
15