Table of Contents
Advertisement
User Manual MN040024EN
Effective November 2016
Proper use
The DX-NET-ETHERNET2-2 fieldbus connection is an electrical
piece of equipment that can be used to control DE1/DC1 variable
frequency drives and connect them to a standard EtherNet/
IP fieldbus system. It is intended to be installed in a machine or
assembled with other components into a machine or system. It
makes it possible for DE1/DC1 series variable frequency drives to
be integrated as I/O devices into EtherNet/IP fieldbus systems.
Figure 3. Designation at DX-NET-ETHERNET2-2
1 PC
2 Head controller (I/O controller)
3 Switch
4 EtherNet/IP cable
5 DE1/DC1-E variable frequency drive with DX-NET-ETHERNET2-2
connection
6 Motor(s)
x
The DX-NET-ETHERNET-2 fieldbus connection is not a household
appliance, but rather a component intended exclusively for use
in commercial applications.
x
Observe the technical data and connection requirements
described in this manual. Any other usage constitutes
improper use.
Maintenance and inspection
The DX-NET-ETHERNET2-2 fieldbus connection will not require
any maintenance if the general rated operational data as well as all
EtherNet/IP-specific technical data, is adhered to. However, external
factors can influence the components's lifespan and function. We
therefore recommend that the devices are checked regularly and
the following maintenance measures are carried out at the specified
intervals.
The DX-NET-ETHERNET2-2 fieldbus connection has not been
designed in such a way as to make it possible to replace or repair it.
If the card is damaged by external influences, repair is not possible.
4
EATON www.eaton.com
DX-NET-ETHERNET2-2 fi eld bus connection
EtherNet/IP for variable frequency drive DE1/DC1
Storage
If the fieldbus connection is stored before use, suitable ambient
conditions must be ensured at the site of storage:
Storage temperature: –40 to +85 °C,
•
Relative average air humidity: < 95 %, no condensation permitted.
•
Service and warranty
Contact your local sales partner if you have a problem with your
Eaton fieldbus connection.
When you call, have following data ready:
The exact part no. (DX-NET-ETHERNET-2)
•
The date of purchase
•
A detailed description of the problem which has occurred
•
Information concerning the guarantee can be found in the Terms
and Conditions Eaton Industries.
Disposal
The DX-NET-ETHERNET2-2 fieldbus connection can be disposed
of as electrical waste in accordance with the currently applicable
national regulations. Dispose of the device according to the
applicable environmental laws and provisions for the disposal of
electrical or electronic devices.
Advertisement
Table of Contents
