Setup Menu - Strong SRT 24B3003 User Manual

Import Database
Export Database
Clear Lock
NOTE:

5.7 Setup Menu

Language
TXT Languages
Audio Languages
Subtitle Language
Hearing Impaired
Aspect Ratio
Blue Screen
First Time Installation
Reset Restore Factory Default
Software Update (USB)
NOTE:
Environment Home /Shop Switch between Home modes and Shop modes with default more brightness
HDMI CEC
Press ENTER to Import the Database from a compatible TV.
Press ENTER to Export the Database to a compatible TV.
Press ENTER to reset all functions set in this menu.
For the Import Database and Export Database functions you need to connect
a USB device formatted in FAT32.
Select the Menu language of your choice. The default setting is English. Press
pq to select the menu language.
Press pq t u to select correct character type belong to language to display
correct the TXT. Selection are: West, East, Russian, Arabic or Farsi.
Press t u to select Primary for main audio track or Secondary next audio
channel if first is not available. Press pq t u to select your chosen Audio
Language, then press ENTER.
Press pq t u to select your chosen Subtitle Language, then pressENTER to
select.
If you like to have extra subtitles support then select this function to On.
Change in this option the picture format from displayed video on the screen.
PressENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
If you select a input with no signal and like to have Blue colour screen instead
black. Select this function to On.
This option allows you to perform the First Installation again. The complete
description is available on chapter 3.
Press pq to select this function, by pressing ENTER. You will reset all the
settings contained in the main menu and deleted all installed channels. TV
will go back to First Time Installation. See chapter 3.
If a new software release for this model is available on our website and you
have copied the unzipped file to an empty USB device, formatted in FAT32,
you can upgrade the system software of this TV. After successfully update
a message appears on screen. Power off by removing the main power
connector. Remove USB device and power ON.
NEVER disconnect the USB device from the TV, the TV from the main or
switch OFF power during the update procedure. It can damage your device
and warranty will void!
and Auto standby to off.
See next chapter 5.7.1.
13