Table of Contents
Advertisement
Hardware Installation
Warning! Hard drives and drive duplicators require care-
ful handling, especially when being transported. If you are
not careful with your hard disk, lost data may result. Be sure
that you are properly grounded by wearing an anti-static
strap when handling computer components or discharge
yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for
several seconds.
Ensure the Power Switch is set in the Off position. Connect
1.
the Universal Power Adapter to the Power Adapter Port
on the back of the Duplicator an the other end to an AC
Electrical Outlet.
Connect a Source Drive to the SATA HDD Source Port on
2.
the Duplicator.
SATA HDD/SSD: Connect the Short SATA Cable (included)
•
to the SATA HDD Source Port and the other end to the
SATA Port on the SATA HDD/SSD.
PC Installation: Connect the Long SATA Cable (included)
•
to the SATA HDD Source Port and the other end to the
SATA Port on a SATA HDD/SSD installed in a PC.
eSATA HDD/SSD Enclosure or Docking Station: Connect
•
the eSATA + 12V Power Cable (included) or eSATA+5V
Power Cable (included) to the SATA HDD/SSD Port and
the other end to a SATA Port on an Enclosure or Docking
Station.
Note: The Source Drive can be a drive you intend to make
an exact copy of, or an Image drive containing several hard
drive images.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
7
Advertisement
Table of Contents
Need help?
Do you have a question about the SATDUP11IMG and is the answer not in the manual?
Questions and answers