Advertisement
Step 6:
Fold the rear of the hood tightly around the folded
frame. Fold the rear panel underneath and then
over the top. Make sure the rear panel is folded in
the correct direction.
Step 7:
Pull the elastic cords over the tightly rolled hood.
Attach the end of the cords in the loop.
Step 8:
Make sure the elastic cord is attached correctly.
Pay Attention! to the elastic cord that may snap
loose if not properly attached.
Step 9:
The rolled hood and frame can be lifted from the
bended tubes.
Step 10:
Place the hood on the two lower hooks that can be
found on the rear of the bench.
Instructions for the assembly and disassembly of the hood | Chat 20.01
6
Advertisement
