1.8.2
CMOS Mode Selection (JCOMS1)
The AIMB-U217 motherboard contains a pin header that can erase CMOS data and
reset the system BIOS information. To reset the CMOS data, you need to short Pins
1 & 2. This procedure resets the CMOS to its default settings.
Table 1.2: CMOS Mode Selection (JCOMS1)
Pin
1
2
1.8.3
LVDS Panel Voltage Selection Header (JLVDS1)
Table 1.3: LVDS/eDP Panel Voltage Selection (JLVDS1/JLVDS2)
Function
Set LVDS Panel as +5V (2-4)
Set LVDS Panel as +3.3V (Default) (4-6)
Set LVDS Panel as +12V (3-4)
AIMB-U217 User Manual
Signal
RTC RESET#
GND
Setting
8