Table of Contents
Advertisement
Maintenance – changing a light bulb.
Replacing a bulb (Fig. 3)
•
Prior to touching the light bulbs ensure they are cooled
down.
•
Carefully use a small screwdriver as a lever on the
borders of the lamp in order to remove the light bulb.
•
Slide out the light bulb to be replaced and insert a new
12V 20W 30° Ø35 12V GU4 PHILIPS STANDARD LINE
code 425409.
•
Carry out the replacement and mount the new light
bulb by following instructions in the reverse.
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.
* PLEASE NOTE - Defective bulbs should be replaced immediately.
11
Warning!
Disconnect the hood
from the electricity before
commencing this process.
Advertisement
Table of Contents
