Table of Contents
Advertisement
• Check inside the product and insure that there is no transit
packaging or any other materials, such as packets of screws,
guarantees etc. These should be removed and kept for future use.
• If possible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the rear wall and
ceiling. If this is not possible, then a thick, protective covering
should be placed over the worktop, hob top or cooker. This will help
to protect these surfaces from damage and debris.
•
Select a flat surface for assembling the cooker hood. Cover that
surface with a protective covering and place all cooker hood parts
and fittings on it.
• In addition check whether there is an electrical socket available,
which will be accessible after the hood is mounted. If you are going
to use the appliance in extractor mode, you should also ensure that
there is space to connect a fumes discharge device to the outside.
• Raw plugs are provided to secure the hood to most types of walls
and ceilings. However a qualified technician must verify the
suitability of the materials, in accordance with the type of wall and
ceiling. The wall and ceiling must be strong enough to take the
weight of the hood.
Do not tile, grout or silicone this appliance to the
wall. This appliance is designed to be surface
mounted only.
Note: The hood may be installed with or without a chimney.
16
Advertisement
Table of Contents
