Table of Contents
Advertisement
Connecting to external ducting (Figure 5b)
• Install the flange supplied on the exit hole of the hood (5b).
• (Figure 6) Connect the ducting hose (13) to the flange and then
connect the other end to the external vent. Please note that the
ducting hose is not supplied with the cooker hood.
• (Figure 6) Apply the chimneys and fasten them on with two
screws (16a) to the chimney support bracket „G" (16b). Then make
the lower part of the chimney slide into the suited part (14) on top
of the main section of the cooker hood.
• Refit the grease filter and close the cover screen.
• As the product is being ducted externally, there is no need for a
carbon filter to be fitted.
Electrical connection
• The electrical connection must correspond to the electrical
requirement noted on the rating plate, which is placed inside the
cooker hood. The appliance should be connected to the electrical
supply. See page 14 for detailed information on the electrical
connection.
20
Advertisement
Table of Contents
