Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS – Before beginning installation.
PLEASE NOTE THAT YOU WILL HAVE
TO DECIDE BEFORE INSTALLING YOUR
COOKER HOOD WHETHER TO USE IT IN
EXTRACTION MODE OR
RECIRCULATION MODE. PLEASE TURN
TO PAGE 17 NOW TO UNDERSTAND
THE DIFFERENCES BETWEEN THESE
TWO MODES.
The cooker hood should not be exposed to a direct heat
source from the cooking device underneath it, i.e. naked
flame from a gas burner or heat from electric hob zones
without a pan on them.
We recommend that at least two people install this hood.
The lights on this appliance should only be used during
operation of the cooker hood. They should not be left on
permanently and used as a lighting source.
Before beginning installation:
• Check that the product purchased is of a suitable size for the
chosen installation area. In addition check whether there is an
electrical socket available that will be accessible once the hood is
mounted. If the product is going to be used in extraction mode,
then there should also be space to connect a ducting hose to the
outside.
• Carry out all necessary masonry work prior to the fitting of the
cooker hood.
• Ensure that all electrical connections are carried out by a
suitably qualified person.
•
Before commencing installation of the cooker hood the grease
filter should be removed.
15
Advertisement
Table of Contents
