2. Fasten the prepared gland at the device:
⑥
⑦
Figure 5-9
– Fasten the Ethernet cable in the cable gland
Connecting the Ethernet cable
1. Isolate the free cable end.
2. Assemble the stripped cores in a FastConnect plug.
3. Insert the Ethernet plug into the service interface of the processing module. You must feel
for the position of the interface.
Devices in explosion-proof design
Compact Operating Instructions, 05/2018, A5E35134047-03
Plate with cable glands
Position cable gland Ethernet cable (underside of the device)
Ethernet cable: Position of the cable gland
5.2 Electrical connections
⑦
⑥
at the plate
.
Connecting
51