Carescape Pdm; Cleaning And Disinfection Overview; Cleaning; Cleaning Warnings - GE CARESCAPE PDM Supplement Manual

CARESCAPE PDM

Cleaning and disinfection overview

The following cleaning and disinfection information applies to devices, device
components, supplies, and accessories manufactured by GE.
The information provided in this chapter does not supersede any instructions for use
provided by the manufacturer or provided with a device, device component, supply,
or accessory.
For cleaning, disinfection, and care information for devices, device components,
supplies, and accessories made by manufacturers other than GE, see the applicable
instructions for use provided by the manufacturer.

Cleaning

Cleaning warnings

WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
2110145-001
Before cleaning or disinfecting, disconnect the device from
the power source.
Avoid using chemicals other than the ones described in this
document, as they may damage device surfaces or labels,
or cause equipment failures.
Do not pour or spray any liquid directly on the device, cables,
or leadwires or permit fluid to seep into connections or
openings.
Never immerse any part of the device, cables, or leadwires in
liquids or allow liquid to enter the interior of the device.
Do not autoclave any part of the system with steam (including
cables or leadwires) or sterilize with ethylene oxide.
Never use conductive solutions, oxidizing compounds, wax, or
wax compounds to clean device.
If liquid has accidentally entered the system or its parts,
disconnect the power cord from the power supply, remove
the battery, and have the equipment serviced by qualified
service personnel.
Cleaning and disinfecting
2
11