Table of Contents
Advertisement
Disinfection
Telemetry monitoring devices
Disinfection notices
NOTICE
NOTICE
Disinfection points to note
Always clean before disinfecting.
●
Always dilute cleaning and disinfectant agents according to their manufacturer's
●
instructions. Always consider your hospital guidelines as well.
Use only the permitted substances.
●
Your hospital guidelines permitting, all cleaning and disinfection activities can
●
be carried out at the bedside.
Before drying a surface after wiping it, wait the minimum time required according
●
to the substance manufacturer's instructions.
Visually ensure that no substance residue remains on the device.
●
Permitted disinfectants
About the following table:
All third party trademarks are property of their respective owners.
●
Trademark names and product availability may vary by country. Consult the
●
column that lists ingredients to determine if an equivalent disinfectant is available
in your country.
Disinfectant
Manufacturer
CaviWipes*
Metrex Research, LLC.
Cleanisept Wipes
Dr. Schumacher
GmbH
2110145-001
COLOR SHIFT. Some plastics may experience a slight change
in color over time due to effects of disinfecting agents. This
effect is cosmetic and not associated with product safety or
normal function.
SOFT MATERIALS. The plastics used in this product are porous
and may absorb alcohol. Improper use of alcohol based
agents could result in softening, swelling, tackiness, or change
in appearance of the soft materials.
Ingredients
Diisobutylphenoxyethoxyethyl
●
dimethyl benzyl ammonium
chloride - 0.28%
Isopropanol 17.20%
●
Ethylene Glycol Monobutyl Ether
●
(2-Butoxyethanol) 1 to 5%
Cleanisept solution (7.5%) contains as
active ingredients:
Didecyldimethylammoniumchlo-
●
ride 0.25%
Alkylbenzyldimethylammonium-
●
chlorid 0.25%
Cleaning and disinfecting
ApexPro and CARESCAPE Telemetry
Type of disinfectant
Quaternary
ammonium and
alcohol
Quaternary
ammonium
27
Hide quick links:
Advertisement
Table of Contents
