Related Manuals for Invacare Softform
Summary of Contents for Invacare Softform
- Page 1 Invacare® Softform® en Mattresses User Manual This manual MUST be given to the user of the product. BEFORE using this product, read this manual and save for future reference.
- Page 2 All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by ™and ®. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted.
-
Page 3: Table Of Contents
8.3 Environmental Parameters ......15 Contents 1 General ........4 1.1 General information. -
Page 4: General
This is to certify that your Invacare® Softform®Mattress is warranted by Invacare Ltd for a period stated in the Table “Technical Data” of this user guide. PALIN-010-B... -
Page 5: Intended Use
It is Invacare’s goal to ensure that we, at the widest provided technical and scientific advances do not result in technical possible range, use REACH compliant materials and components. -
Page 6: Safety
Invacare® 2.1 Safety information accessories. Accessories designed by other manufacturers have not been tested by Invacare® and WARNING! are not recommended for use with Invacare® products. – Do not use this product or any available optional... -
Page 7: Symbols On The Product
– Check all parts for shipping damage and test before using. – In case of damage, do not use. – Contact Invacare® / Carrier for further instructions. 2.2 Symbols on the product Do not pierce or Line dry... -
Page 8: Components
3 Components Toughed polyurethane coated base User Manual 3.1 Product description * This example is based on the Softform® Premier, other mattress The Invacare® Softform® mattress offers exceptional pressure configurations may vary. reducing qualities, specific to the individuals needs. By promoting even weight distribution, they reduce tissue pressure at potentially vulnerable areas. -
Page 9: Usage
Usage 4 Usage IMPORTANT! If holes are present in the mattress cover, there is a danger that liquids may ingress and contamination may 4.1 Safety information occur. – Medical equipment including infusion pumps and Remove all packaging before use. monitors should be attached to appropriate bed Place the mattress directly on the frame of the bed. -
Page 10: Transport
Invacare® Softform® 5 Transport 5.1 Safety information IMPORTANT! – Take care when handling mattresses to ensure no damage to the cover. It is recommended that two people life/carry mattresses. – Avoid contact with jewellery, nails, abrasive surfaces etc. – Do not drag mattresses. -
Page 11: Maintenance
Maintenance Remove all covers for laundering. 6 Maintenance Launder the covers with the recommended temperature at 80 °C using a diluted detergent solution (Instructions on label). 6.1 Inspection IMPORTANT! It is recommended that the mattress is checked (foam and cover) for Washing at higher temperatures will cause shrinkage. - Page 12 Polyurethane coated fabrics can absorb liquids for short periods causing a temporary change to the polyurethane For the Softform® mattresses, an antimicrobial Softform® Silver3™ characteristics. The mattress cover swells temporarily cover is available as an optional extra.
-
Page 13: After Use
After Use 7.2 Re-Use 7 After Use A cleaning record must be kept as part of cleaning the system. 7.1 Storage The product is suitable for repeated use. The number of times it can be used depends on how often and in which way the product is used. To ease storage and handling the mattresses are sometimes compact rolled depending on customer requirements. -
Page 14: Technical Data
Invacare® Softform® 8 Technical data 8.1 General Data Product Warranty Firetesting Grade ref & Nominal Nominal Maximum Weight Colour density hardness user weight range range [N] [kg] product [kg/m3] [kg] PREMIER Cover: 5 years EN 597-1, 2 RX 39/120 Pink 38 –... -
Page 15: Materials
Warranty is against manufacturing defects. Based on the weight of a standard size mattress. This can change if different sizes are ordered. 8.2 Materials 8.3 Environmental Parameters Operating conditions Invacare® Softform® Ambient temperature 10 - 35 °C Foam Polyurethane Combustion Modified High... - Page 16 Tel: (44) (0) 1656 776 222 Fax: (44) (0) 1656 776 220 uk@invacare.com www.invacare.co.uk Invacare UK Operations Limited, Pencoed Technology Park, Pencoed, Bridgend CF35-5AQ – Wales – United Kingdom Switchboard Tel: (44) (0)1656 776200, Fax: (44) (0)1656 776201 Customer service Tel: (44) (0)1656 776222, Fax: (44) (0)1656 776220 Email: uk@invacare.com...
Need help?
Do you have a question about the Softform and is the answer not in the manual?
Questions and answers