Invacare SOLO2 Quick Start Manual
Hide thumbs
Also See for SOLO2:
- Quick reference manual (44 pages) ,
- Manual del operador (60 pages) ,
- User manual (52 pages)
Advertisement
Quick Links
User Maintenance
Cleaning the Air Filter
Check the air filter daily and clean it at least once a week.
1. Squeeze the thumb tabs on the inlet filter grill and
remove from the unit.
2. Lift out the filter.
3. Use a vacuum cleaner or wash with a mild liquid dish
detergent (such as Dawn) and water. Rinse thoroughly.
4. Thoroughly dry the filter and inspect for fraying,
crumbling, tears and holes. Replace filter if damage
is found.
5. Reinstall the air intake filter and snap the filter cover
back in place.
Please call Home Care Medical
at 1.800.369.6939 extension 207
with any questions you may
have related to your SOLO
Home Care Medical, Inc.
Corporate Headquarters
5665 South Westridge Drive Suite 100
5665 S Westridge Dr. Suite 100 / New Berlin, WI 53151
New Berlin, WI 53151
Ph 262.786.9870 / 800.369.6939
www.homecaremedical.com
Ph 414.423.8800
www.homecaremedical.com
Getting on with life... Home Care Medical makes it possible.
Invacare SOLO
Quick Start Guide
From your Home Care Medical Respiratory Team
Operating Your Transportable Oxygen Concentrator
1. Read your Operator's Manual.
2. To turn the SOLO
3. To adjust the liter flow, press and hold the
4. With the Mode & Flow screen displayed, press and hold
5. Wait until the Mode & Flow screen flashes three times.
.
2
concentrator on, press and hold the
2
On/Off button until the three warning lights display and
the unit beeps.
Mode/Return/Highlight button (left arrow symbol) to
scroll through the three menu screens.
the Up/Increase button (plus sign) or the Down/Decrease
button (minus sign) until desired setting is achieved.
™
2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Invacare SOLO2
Summary of Contents for Invacare SOLO2
- Page 1 Invacare SOLO User Maintenance ™ Cleaning the Air Filter Quick Start Guide Check the air filter daily and clean it at least once a week. From your Home Care Medical Respiratory Team 1. Squeeze the thumb tabs on the inlet filter grill and remove from the unit. Operating Your Transportable Oxygen Concentrator 2. Lift out the filter. 1. Read your Operator’s Manual. 3. Use a vacuum cleaner or wash with a mild liquid dish 2. To turn the SOLO concentrator on, press and hold the detergent (such as Dawn) and water. Rinse thoroughly. On/Off button until the three warning lights display and 4. Thoroughly dry the filter and inspect for fraying, the unit beeps. crumbling, tears and holes. Replace filter if damage 3. To adjust the liter flow, press and hold the is found.
- Page 2 Important Battery Information Prolonging Battery Life: Do’s and Don’ts Charging the Battery 1. To charge the battery module, make sure that the module Do’s is fully seated on the unit. • Fully charge the battery module overnight when you first receive your transportable oxygen concentrator. 2. Perform one of the following: • Always ensure the battery module is recharged as soon as A. Connect the DC power cable. possible after it becomes fully discharged. The battery may B. Connect the AC power adapter. permanently degrade if left fully discharged for an extended 3. Turn off the unit for a fast charge time. Charging times length of time. are extended if the unit is operating. • Heat is the worst enemy of a battery. Allow plenty of air to Note: DC power input may not be sufficient to charge battery if unit is operating. circulate around the transportable oxygen concentrator so Note: If the battery is completely discharged, it will fully charge in approximately that the battery is kept as cool as possible.
Need help?
Do you have a question about the SOLO2 and is the answer not in the manual?
Questions and answers