Installation Instructions - DTS Alt 600 Installation Manual

1). Read the instructions carefully.
2) Make sure the door structure is solid and suitable to
be motor driven.
3) Make sure that when the door is moving there are no
friction points.
4) The door must be properly balanced and must be
easily lowered and raised by hand.
5) Install a 220V, adequately protected 3-pin socket near
where the Alt 600 opener is going to be installed
2
Refer to Fig. 2 for recommended installation
1) Alt 600 sectional door opener
2) Infra Red Beams (Optional)
3) Inside push button panel
4) Power Point (Not provided)
CHAIN SHUTTLE ASSEMBLY
For ease of installation the Alt 600 is delivered with
the chain and chain shuttle already assembled in the
track. if you need to assemble it yourself connectthe
chain shuttle to the chain with screw C tightened firmly.
Move shuttle B to half way along the rail section, grease
the chain and sprocket (Fig.3) with a lithium type grease
or equivalent. Do not use oil type lubricants.
2
5) Power Head
-5-
Sectional
Overhead Door
H max. 2600mm
Tilting
Overhead Door
H max. 2600mm
4
3
5