Safety Notes - Westfalia ZQJ3116 Instruction Manual

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Make sure the voltage corresponds to the type label on the unit.
Persons with limited physical, sensorial or mental abilities or lack of know-
how and/or lack of knowledge are not allowed to use the unit, unless they are
supervised for their safety by a qualified person or are briefed by the respon-
sible person how to use the unit.
Only operate the radial drill press on a grounded wall socket.
Only use approved extension cable with a cable quality of at least 1.5 mm
Ask your electrician. Unroll the extension cable from the cable drum. Never
use a damaged extension cable.
The radial drill press is designed for drilling metal, wood, plastic and similar
materials. Please observe the appropriate working speed for the resp. materi-
als.
Keep the drill bits and cutting tool clean and sharp at all times and do not use
cutting tools that are not designed for this job.
Only use the machine for domestic purposes and in the way indicated in
these instructions. The machine is not designed for continuous, professional
use.
Do not drill harmful materials for this radial drill press.
Always keep the power cord away from the moving parts of the radial drill
press.
Do not allow the radial drill press to work unattended. If not in use, switch off
the machine.
Do not operate the radial drill press in damp environment and do not allow
moisture to enter the machine.
Do not operate the radial drill pres close to combustible liquids or gases.
There is risk of explosion!
Always fix the workpiece when drilling. Never hold the workpiece to be drilled
with your hands.
Maintaining or cleaning the radial drill press is only allowed if the spindle has
stopped completely. Additionally unplug from power mains.
Make sure all parts are firmly mounted before switching on the radial drill
press.

Safety Notes

20
2
.