Device Range - Siemens RXB Series Basic Documentation

Introduction
Note
Synco 700
Synco living
Synco RXB/RXL
Synco RDG/RDF/RDU
Service tool
RMZ790 and RMZ791
operator units
Synco 100, Synco 200
8 / 88
Siemens
Building Technologies
1.2

Device range

The table below lists the devices in the Synco 700, Synco living, RXB/RXL, and
RDG/RDF/RDU ranges which have a TP1 (wired) KNX interface.
These devices have a network address and can communicate via the KNX bus in
LTE-Mode.
The table does not list all devices of the range (e.g. Synco 700 extension modules
RMZ78x are not listed).
Devices
Universal controllers
For use in ventilation, air conditioning and chilled water systems as well
as for primary plant with individual room control.
Heating controllers
For boiler and heating circuit controls, primary controllers, and district
heating plants.
Boiler sequence controller
For multiple boiler systems with up to 6 boilers.
Central control unit
For individual room control with RXB/RXL room controllers.
Switching and monitoring device
For HVAC and chilled water applications.
Bus operator unit
Access via KNX to Synco 700 devices and RXB/RXL room controllers.
Room unit
With setpoint adjustment, mode and timer buttons.
Central communication units
For remote operation and monitoring of Synco devices in KNX networks
Central communication unit for up to 4, 10 or 64 Synco devices
Central communication unit for up to 250 Synco devices.
Central apartment unit
To manage one apartment. Heating/cooling/ventilation, control of lighting
and blinds, door and window monitoring.
Room controllers
For fan-coil units with 3-speed fan control
For fan-coil units with 3-speed fan control and electric heating coil
For fan-coil units with 3-speed fan control
For fan-coil units with 3-speed fan control and electric heating coil
For fan-coil units with 3 analog outputs, DC 0...10 V
For fan-coil units with 3 analog outputs, DC 0...10 V
For chilled ceilings and radiators
For chilled ceilings and radiators
Communicating room thermostats
Fan coils, semi-flush mount
Variable air volume, semi-flush mount
Fan coils, wall mount
Variable air volume, wall mount
ACS790 software and service-interface
For Synco device commissioning and diagnostics.
In small plants in particular, the RMZ790/RMZ791 operator units (no bus devices)
allow for commissioning of Synco 700 RM... controllers (e.g. set device address,
see Section 4.2).
Operator units
Plug-in unit for Synco 700 controllers
Also suitable for mounting away from controller, e.g. on control panel door.
The devices in the Synco 100 and Synco 200 ranges are non-communicating and
are not dealt with in this document.
KNX bus communications
KNX and Synco
Types Data
sheet
RMU710B
RMU720B
RMU730B N3150
RMH760B N3133
RMK770 N3132
RMB795B N3122
RMS705B N3124
RMZ792 N3113
QAW740 N1633
OZW771 N3117
OZW772 N5701
QAX903 N2741
QAX913 N2740
RXB21.1 N3873
RXB22.1
RXL21.1 N3877
RXL22.1
RXB39.1 N3875
RXL39.1 N3876
RXB24.1 N3874
RXL24.1 N3878
RDF...KNX N3171
RDU341 N3172
RDG1..KN 3191
RDG400KN 3192
OCI700.1 N5655
RMZ790 N3111
RMZ791 N3112
For internal use only
CE1P3127en
2013-04-08