Table of Contents
Advertisement
Figure 31 Removing a PSR450-12D power module
(1) Use a flathead screwdriver to loosen the screws on the power cord connector
(2) Pull the power cord out
Connecting the power cord
WARNING!
Provide a circuit breaker for each power input. When you connect a power cord, make sure the
circuit breaker is switched off.
Connecting the power cord for a
PSR250-12A/PSR250-12A1/PSR450-12A/PSR450-12A1
power module
Insert the female connector of the power cord supplied with the power module into the power
1.
receptacle on the power module.
Use a cable tie to secure the power cord to the handle of the power module, as shown in
2.
32.
Connect the other end of the power cord to an AC or DC power source.
3.
Figure 32 Connecting the power cord (PSR250-12A power module)
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power module
20
Figure
Advertisement
Table of Contents
