Advertisement
Available languages
Available languages
ELECTRICAL HOOK-UP
Before connecting to the electricity, make sure that:
-
the characteristics of the electrical system satisfy what is shown on the serial number plate applied to the front
of the oven;
GB
-
the system has an effective earth connection compliant with current standards and laws.
The earth connection is required by law. The cable must not, at any point, reach a temperature greater than 50 °C
above the ambient temperature.
This oven must be connected to the electricity through a power supply cable and plug that is compatible with the outlet
of the electrical system that powers this oven.
If a fixed appliance does not have a power cord and plug, or another device that ensures disconnection from the mains,
with an opening distance of the contacts that allows complete disconnection under the conditions of excessive voltage
category III, such disconnection devices must be provided in the power supply mains conforming to the installation
rules.
The omnipolar socket or switch must be easy to reach when the appliance is installed.
Note: The manufacturer declines all liability if the usual accident prevention standards and the above instructions are
not followed.
TYPE AND MINIMUM DIAMETER OF
THE CABLES
H05RR-F 3x1,5 mm²
H05VV-F 3x1,5 mm²
H05RN-F 3x1,5 mm²
H05V2V2-F 3x1,5 mm²
46
SASO
H05RR-F 3x2,5 mm²
H05VV-F 3x2,5 mm²
H05RN-F 3x2,5 mm²
H05V2V2-F 3x2,5 mm²
Advertisement
