BORETTI BPOL-60 Operating Instructions Manual page 38

GB
The control suggests a temperature for each function, which you can change at any time, but if you consider it
suitable, you don't need to do anything else, the oven will start by itself in just a few seconds!
Setting the temperature
The control uses a temperature probe that is accurate to ±5 °C for the
maximum reliability of the cooking temperatures requested.
To change the temperature just press the plus or minus symbol; the
range of temperature settings goes from +50 °C to +250 °C.
You don't need to confirm the change, the control activates by
itself after a few seconds.
The temperature can be changed at any time. Select the cooking function and pres the – and + symbols.
During heating, the centigrade symbol (°C) flashes to indicate that it is heating up to reach the selected temperature.
When the temperature is reached, it beeps.
Note: ALWAYS BE VERY CAREFUL WHEN OPENING THE DOOR OF THE APPLIANCE BECAUSE, DEPENDING
ON THE CASE, STEAM OR BOILING HOT AIR COULD COME OUT.
38