BORETTI BPOL-60 Operating Instructions Manual page 40

GB
The countdown starts now. After the indicated cooking time has elapsed, the oven will beep and the heating elements
will turn off, ending cooking. The dedicated symbol and time that was set will flash in the clock display: press any key
to stop the beep. After eight seconds, the oven will automatically turn off, if other cooking functions have not been set.
Timer programming: end-of-cooking time
The countdown starts now. After the indicated time has elapsed, the oven will beep, the heating elements are turned
off and cooking will end. The dedicated symbol will flash and the clock display will show the time that was set: press
any key to stop the beep.
After eight seconds, the oven will automatically turn off, if other cooking functions have not been set.
Timer programming: delayed cooking
By combining the two modes, "cooking time" and "end-of-cooking time", you can program the oven so that cooking
starts later than the current time.
For example, if you want to go out at 8:30 and you want a roast to be ready when you return at 13:00, do this:
Once the cooking time is entered, the display will flash the current time
again and the "cooking time" symbol will be lit.
Touch the timer symbol two times and the relative symbol will light up.
The separator does will flash to indicate that you can set the end-of-
cooking time.
Set the end-of-cooking time by touching the "+" and "-" symbols.
Once the end-of-cooking time is entered, the display will flash the current
time and the "end-of-cooking time" symbol will be lit.
40