Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro A2SAN-H User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)

Tools Needed

VGA
JPF1
FAN1
JIP1
JLCDPWR1
JCOM2: COM3/COM4

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (4)
USB6(3.1)
JHDMI1
USB2/3
CPU1
A2SAN-L
REV: 2.00
DESIGNED IN USA
JCOM3: COM5/COM6 JCOM1: COM1/COM2
23
Chapter 2: Installation
Standoffs (4)
Only if Needed
USB4/5(3.0)
LAN2 LAN1
JD1:
SPEAKER
JF1
PWR
RST
HDD LED
PWR LED
AUDIO FP
BT1
JPME2
JD1
JPH1
I-SATA1
LED1
JGP1
USB0/1
JF1
ON X
X
X
X