Supermicro A2SAN-H User Manual page 72

Hide thumbs Also See for A2SAN-H:

Table of Contents

Super A2SAN-H/-E/-L and X11SAN User's Manual

COM Port Mode

Use this feature to select the COM port mode. The options are RS232 Mode, RS422 Mode/

RS485 Full Duplex Mode, and RS485 Half Duplex Mode.

Baud Rate from different PRE-DIVIDER

Use this feature to select the Baud rate frequency. The options are PRE-DIV: 13, 1.8461M

Hz, PRE-DIV: 12, 2M Hz, PRE-DIV: 1, 24M Hz, and PRE-DIV: 1.625, 14.769M Hz.



Serial Port 2 Configuration

Serial Port

Select Enabled to enable the onboard serial port specified by the user. The options are

Disabled and Enabled.

Device Settings

This feature displays the base I/O port address and the Interrupt Request address of a

serial port specified by the user.

Change Settings

This feature specifies the base I/O port address and the Interrupt Request address of Serial

Port 2. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address

to a serial port specified. The options are Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4,

5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).