Supermicro A2SAN-H User Manual page 46

Super A2SAN-H/-E/-L and X11SAN User's Manual
Power Force On
Use this jumper to select the "POWER FORCE ON" function when the AC power cord is
plugged in. When enabling force power on and AC power recovery, the system will boot up
automatically without pressing the power button.
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. See the table below for jumper settings.
1
VGA
JPF1
FAN1
JIP1
A2SAN-L
REV: 2.00
DESIGNED IN USA
JLCDPWR1
JCOM2: COM3/COM4
JCOM3: COM5/COM6
Power Force On
Jumper Settings
Jumper Setting Definition
Power Force On (Default)
Pins 1-2
(when AC power cord is plugged)
PWR BTN Power On
Pins 2-3
(when AC power cord is plugged)
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
USB6(3.1)
JHDMI1
USB4/5(3.0)
USB2/3
CPU1
JCOM1: COM1/COM2
JD1
JPH1
I-SATA1
LAN2 LAN1
LED1
JD1:
SPEAKER
JGP1
USB0/1
JF1
JF1
PWR ON X
RST X
HDD LED X
PWR LED X
2
AUDIO FP
BT1
JPME2
46
1. Power Force On
2. Manufacturing Mode