Serial Port Console Redirection; Com1 Console Redirection Settings - Supermicro A2SAN-H User Manual

Super A2SAN-H/-E/-L and X11SAN User's Manual
•
Fan1 Speed
•
VCORE
•
VDIMM
•
12V
•
5V
•
AVSB
•
3VSB
•
3VCC
•
VBAT

Serial Port Console Redirection


COM1 Console Redirection
Select Enabled to enable console redirection support for a serial port specified by the user.
The options are Enabled and Disabled.
*If COM1 Console Redirection is set to Enabled, the following features will become
available for configuration:
COM1 Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data with the
client computer, which is the remote computer used by the user.
COM1 Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set. Select
VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The
options are VT100, VT100+, VT-UTF8, and ANSI.
COM1 Bits per second
Use this feature to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 38400, 57600, and 115200 (bits per second).
74