Supermicro A2SAN-H User Manual page 84

Super A2SAN-H/-E/-L and X11SAN User's Manual
Wake On LAN
Select Enabled for Wake On LAN support, which will allow the system to wake up when
an onboard device receives an incoming signal. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. Use the
keyboard to select a value.
UEFI Driver
This feature displays the UEFI driver version.
Adapter PBA
This feature displays the Processor Bus Adapter (PBA) model number. The PBA number is
a nine digit number (i.e., 010B00-000) located near the serial number.
Device Name
This feature displays the adapter device name.
Chip Type
This feature displays the network adapter chipset name.
PCI Device ID
This feature displays the device ID number.
PCI Address
This feature displays the PCI address for this computer. PCI addresses are three two-digit
hexadecimal numbers.
Link Status
This feature displays the connection status.
MAC Address
This feature displays the MAC address for this computer. Mac addresses are six two-digit
hexadecimal numbers.
Virtual MAC Address
This feature displays the Virtual MAC address for this computer. Mac addresses are six two-
digit hexadecimal numbers.
84