Related Manuals for Smith & Noble Poly Shutters
Summary of Contents for Smith & Noble Poly Shutters
- Page 1 Step by Step Installation Instructions Poly Shutters Customer Service 800.248.8888 or visit us online at smithandnoble.com...
-
Page 2: Table Of Contents
Table of Contents hank you for purchasing from smith+noble. Your new window treatments have been custom Getting Started ....... . 3 crafted from the highest quality materials. -
Page 3: Getting Started
Getting Started Parts of the Shutter Remove the shutters from the packaging. All panels are marked. Do not mix the panels when there are multiple sets of shutters. TOP FRAME CORNER KEY Do not dispose of packaging until the shutter is operating to your satisfaction. -
Page 4: Assemble The Frame
Frames Assemble the Frame L-Brackets All Frames will be identified with METAL L-BRACKET removable labels. Match the line The trim frame will also include number of the frame with the metal L brackets which are line number of the panel. TOP FRAME CORNER KEY attached to the back side of... -
Page 5: Installing The Shutters
Assemble the Frame (con't) Installing the Shutters Make sure the frame has been Slide the corner key that is in properly assembled and is right the top and bottom frames into the end of each side frame. side up. The top of the frame is indicated by a greater amount of Using a rubber mallet hammer, distance from the top of the top... - Page 6 Installing the Shutters (con't) Installing the Shutters (con't) When the panels are level within Inside Mount the frame, hold the frame in L-, Z- or Trim Frames position and place a screw in the middle bottom frame hole. Make Place frame in opening. Make sure the bottom frame is level sure the frame has been properly TOP FRAME...
-
Page 7: Leveling/Squaring The Panels
Leveling/Squaring the Panels Panel Lock Installation Move bottom frame left or right The Panel Lock system does not Inside Mount L-Frame until the panels are level. If this require any installation when 4-sided does not work then remove the frames are used. The Panel Lock Squareness Adjustments top left screw and move the left caps have already been installed in... -
Page 8: Cap Screw Holes
Magnet Catch Placement Panel Lock Installation Panel Lock Spring Loaded Plunger Note: Ramps will be necessary when Remove the Ramps and drill Install catch plate first as less than 4 frame sides are ordered. a pilot hole for each screw shown on drawings with the using a 3/32"... -
Page 9: Warranty
Warranty All Smith+Noble shutters are designed for a lifetime of trouble-free use and is covered by a limited lifetime warranty. This warranty applies to the original customer/installation with proof of purchase and covers any defects in materials or workmanship provided that the product is measured and installed according to the product instructions.
Need help?
Do you have a question about the Poly Shutters and is the answer not in the manual?
Questions and answers