Subscribe to Our Youtube Channel
Related Manuals for Smith & Noble Eco-Wood Shutters
Summary of Contents for Smith & Noble Eco-Wood Shutters
- Page 1 STEP BY STEP INSTALLATION INSTRUCTIONS Eco-Wood Shutters Deco Frame, L-Frame, Z-Frame, Direct Mount and Hang Strips...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Deco Frame Everything Getting Started ....................... 3 Assemble Frames ....................4 Installing T-Posts & Frames ................. 5 You Need Installing Panels ....................6 - 7 Installing Hinge Spacers ..................8 Installing the Frames & Inserts ................9 4-Sided L Frame A Smooth Set-Up Getting Started .....................10... -
Page 3: Deco Frame Getting Started
DECO FRAME - GETTING STARTED DECO FRAME - ASSEMBLE FRAMES Tools & Parts Assemble the Frame First, make sure you have all the parts and tools required to install your shades. Carefully remove panels and frames from the packaging. Do not mix panels or HARDWARE YOU’LL NEED: frames from other windows. -
Page 4: Installing T-Posts & Frames
DECO FRAME - INSTALLING T-POSTS & FRAMES 4-SIDED L-FRAME - GETTING STARTED NOTE: If not installing a T-POST skip to Leveling the Frame. Tools & Parts Installing T-Posts First, make sure you have all the parts and tools required to install your shades. The top and bottom of the t-post are HARDWARE YOU’LL NEED: labeled, locate and identify. - Page 5 4-SIDED L-FRAME - ASSEMBLE FRAMES 4-SIDED L-FRAME - INSTALLING T-POSTS NOTE: If not installing a T-POST skip to Leveling the Frame. Installing T-Posts Assemble the Frame(s) Outside Mount - Single Panel Locate and identify the top and bottom labeled t-post. Line up Carefully remove panels...
-
Page 6: Installing Panels
4-SIDED L FRAME - INSTALLING & LEVELING FRAMES 4-SIDED L FRAME - INSTALLING PANELS Installing the Frame Install Shutter Panels Position the assembled frame evenly Place the shutter panel in the frame, HINGE around the window opening & and insert hinge pins into hinges. SIDE secure with nail/screw (pre-drill) into Insert hinge side panel into position... - Page 7 4-SIDED L FRAME - INSTALLING FRAMES & PANELS 4-SIDED L FRAME - INSTALLING HINGE SPACERS Secure Frames Check Spacing Once your panel has been shifted Check gaps between panels and (racked) and with the panel in its frame and adjust accordingly with closed position, mark the bottom hinge spacers provided (if needed).
- Page 8 4 SIDED Z FRAME - GETTING STARTED 4-SIDED Z FRAME - ASSEMBLE FRAMES Tools & Parts Assemble Frame(s) First, make sure you have all the parts and tools required to install your shades. Carefully remove panels frames from the packaging. Do not HARDWARE YOU’LL NEED: mix panels or frames from other Pencil, ¼”...
- Page 9 4-SIDED Z FRAME - INSTALLING T-POSTS 4-SIDED Z FRAME - INSTALLING THE FRAMES NOTE: If not installing a T-POST skip to Installing the Frame. Installing T-Posts Installing the Frame If SCREWS will be used, PRE-DRILL The top and bottom of the t-post are in the top left and right frame, labeled.
- Page 10 4-SIDED Z FRAME - INSTALLING THE FRAMES (CON’T) 4-SIDED Z FRAME - INSTALLING PANELS Installing the Frame Level and Install Frame Position the assembled frame evenly Once the left side is secured, level into the window opening by using a the frame on the window and secure tape measure and shims.
- Page 11 4-SIDED Z FRAME - INSTALLING PANELS (CON’T) 4-SIDED Z FRAME - INSTALLING PANELS (CON’T) Install the Shutter Panels Adjust Positioning LEFT SHUTTER PANEL With the top right and left frame Once panels have been positioned secured. and secured with the hinge pins, make sure shutter panels are even Position the panel in the frame.
- Page 12 4-SIDED Z FRAME - INSTALLING HINGE SPACERS 4-SIDED Z FRAME - SECURE FRAMES & PANELS Check gaps between panels and Bottom Once reveal (gap between the panel adjust accordingly with hinge Frame and the frame) is aligned, secure the spacers provided if needed. top and bottom frame.
- Page 13 DIRECT MOUNT - GETTING STARTED DIRECT MOUNT - INSTALLING HINGES Tools & Parts Installing the Left Hinge First, make sure you have all the parts and tools required to install your shutters. Carefully remove panels and light blocks from the packaging. Do not mix panels for HARDWARE YOU’LL NEED: other windows.
- Page 14 DIRECT MOUNT - INSTALLING HINGES DIRECT MOUNT - INSTALLING HINGES Now that your left panel is secured, we will begin installing your right panel. Installing the Right Hinge Installing the Left Hinge With your left panel secured, open Remove the hinge pin to separate the the panel and place the right panel hinge and place onto jam in reference in the window opening and slide to...
- Page 15 DIRECT MOUNT - MOUNTING HINGES DIRECT MOUNT - MOUNTING HINGES Installing the Right Panels Remove the hinge pin to separate the hinge and place onto window Tip: Pre-drilling is recommended for proper setting jam in reference to the mark made of screws.
-
Page 16: Installing Hinge Spacers
DIRECT MOUNT - INSTALLING SPACERS DIRECT MOUNT - INSTALLING LIGHT BLOCKS Installing Hinge Spacers Installing the Light Blocks Now that your panels and hinges You are now ready to install the are installed, close panels, check light blocks. Nail or screw bottom, gaps between panels and around top, left, right light blocks (in this the window opening, and adjust... -
Page 17: Getting Started
HANG STRIP - GETTING STARTED HANG STRIP - ASSEMBLE FRAMES Tools & Parts Assemble Frames First, make sure you have all the parts and tools required to install your shutters. Carefully remove panels and frames from the packaging. Do not mix panels HARDWARE YOU’LL NEED: from other windows. -
Page 18: Hang Strip Install
HANG STRIP - INSTALLING HANG STRIPS HANG STRIP - INSTALLING HANG STRIPS Installing the Right Hang Strip Installing the Left Hang Strip (cont) (Cont) With hang strip properly positioned With hang strip properly positioned in the opening, insert screw in top in the opening, insert screw in top pre-drilled holes and secure right pre-drilled holes and secure left... - Page 19 HANG STRIP - INSTALLING PANELS HANG STRIP - ADJUSTING HINGES Adjusting the Hinges Installing the Panels (cont) Prior to loosening screws, mark your With all hinge pins installed, open starting point for reference. the left panel and place the right shutter panel into the window NOTE: Mark the top of the hinge opening and slide into position.
- Page 20 HANG STRIP - INSTALLING HANGING STRIP INSERTS HANG STRIP - INSTALLING LIGHT BLOCKS Installing Hanging Strip Inserts Installing Light Blocks (cont) Before After adjustments are made, close With the left and right end of the your panels and check the gaps light block secured, close your left between the panels and around the panel and adjust the CENTER of the...
-
Page 21: Warranty
Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase (hang on to your receipt!) and covers defects in material or craftsmanship.
Need help?
Do you have a question about the Eco-Wood Shutters and is the answer not in the manual?
Questions and answers