Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do
not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill
walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. Make sure that the power cord is unplugged.
1
With the help of a second person, place the left
upright on the base as shown.
Attach the upright with 2 hex screw M8*45 (5) and
2 washers (6) on the left of the upright and on the
front upright, use one hex screw M8*16 (64) and
6
one washer (6).
64
5
6
PITL50714_manual_UK_M01300.indd 6
04/07/2014 10:54
Advertisement
Table of Contents
Need help?
Do you have a question about the PITL50714.0 and is the answer not in the manual?
Questions and answers