Important Safety Information - Projecta WORKSHOP HDBC21 Manual

Table of Contents

Advertisement

IMPORTANT SAFETY INFORMATION

Please read this manual thoroughly before use and store in a safe place for future reference.
WARNING
• Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.
• Before charging, read the instructions.
• For indoor use. Do not expose to rain.
• For charging lead acid batteries ONLY (of the size & voltage specified in the specifications table).
• Always charge the battery on the correct voltage setting. Never set the charger to a higher voltage than the
battery.
• Disconnect the 240V mains supply before making or breaking the connections to the battery.
• The battery charger must be plugged into an earthed socket-outlet.
• Connection to supply mains is to be in accordance with National wiring rules.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• If the AC cord is damaged do not attempt to use. It must be replaced or repaired by a qualified person.
• Corrosive substances may escape from the battery during charging and damage delicate surfaces. Store and
charge in a suitable area.
• Ensure all vehicle accessories including lights, heaters, appliances etc are turned off prior to charging.
• This charger is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
FEATURES
CHARGE METER
Clearly displays the rate of charge in Amps to ensure an accurate and thorough charge.
ENGINE START FUNCTION
Starts vehicles with a flat battery after a controlled 5 minute charge.
BOOST CHARGE
Increases charge rate for a short, powerful charge.
12/24V OPERATION (HDBC33 only)
Can be used to charge 12 or 24V batteries.
POLARITY PROTECTION
Fuse protection prevents damage to the charger in the event of reverse polarity and short circuit.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workshop hdbc33

Table of Contents