Table of Contents
Advertisement
24
en | Technical data
Audio
–
Signal-to-noise ratio
Network
Ethernet
Protocols
Encryption
Control
Software update
Configuration
Operation
Mechanical
Dimensions w/o stands
(H x W x D)
Weight
VESA mount
Environmental
Operating temperature
Relative humidity
Thermal value
10.1
Certifications and approvals
Safety
Region
EU
US
Electromagnetic compatibility
Region
EU
2019.10 | v01 | F.01U.345.382
Data rate
Number
IEC 60950
EN 60950
UL 60950
Number
EN 55032: 2015 /AC:2016-07 Emissions CISPR 32: 2012
48 kbps at 16 kHz sampling rate
80 kbps at 16 kHz sampling rate
> 50 dB
10/100/1000 Base‑T, auto-sensing, half/full duplex, RJ45
IPv4, UDP, TCP, HTTP, HTTPS, RTP, RTSP, IGMP V2/V3,
ICMP, ARP, DHCP, digest authentication
TLS (v1.0, v1.1, v1.2), AES (128 bit, 256 bit)
remotely programmable
Configuration Manager
BVMS,
Video Client, stand-alone
47.3 x 150.6 x 186 mm
(1.862 x 5.929 x 7.323 in)
Approx. 1.9 kg (4.2 lb)
100 x 100 mm (3.937 x 3.937 in)
0 °C to +50 °C (+32 °F to +122 °F) ambient temperature, with
airflow
0 °C to +40 °C (+32 °F to +104 °F) ambient temperature, still
air
0 to 90% atmospheric humidity, non-condensing
Approx. 125 BTU/h, 205 BTU/h max
Installation manual
VIDEOJET decoder 7000
Bosch Securtity Systems B.V.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VIDEOJET decoder 7000 and is the answer not in the manual?
Questions and answers
Good day, I have Videojet decoder 7513 in my location, however this even though it's on the network with my BVMS I cannot add it to the BVMS. 1. I tried the scan for Decoder option in the config client, yet the device could not be located. 2. When i ping the decoder IP address i get a "destination unreachable" reply 3. I also discover that on directly connecting a monitor to the decoder, there was image on the screen. please I need urgent assistance to resolve this issue Thank you.