Dahua Digital VTH Quick Start Manual page 23

Set parameters of SIP server by reference to Table 2-4.
Parameter
Server IP
Network Port
User Name
Register Pwd
Domain
User Name
Login Pwd
Set "Enable Status" to be
Enable SIP server function.
Press [OK] to save settings.
Press [VTO Config].
The system displays "VTO Config" interface, as shown in Figure 2-17.
错误!使用"开始"选项卡将 Heading 1,l1,H1,Title1,Normal + Font: Helvetica,Bold,Space Before
12 pt,Not Bold,Heading One,h1,Head1,Head,1,Numbered,nu,Level 1 Head,1st level,Section He
ad,Sec1,h11,1st level1,h12,1st level2,h13,1st level3,h14,1st level4,h15,1st level5,h16,h17 17
Figure 2-16
Description
When the platform works as SIP server, server IP is IP address
of the platform.
When VTO works as SIP server, server IP is IP address of the
VTO.
When the platform works as SIP server, network port is 5080.
When VTO works as SIP server, network port is 5060.
Use default value.
Registration domain of SIP server, which can be null.
When VTO works as SIP server, registration domain of SIP server
shall be VDP.
User name and password to login SIP server.
Table 2-4
.