This VTO works as SIP server.
Select "SIP Server Enable", and click "OK" to save config. The VTO reboots
automatically.
Another VTO or platform works as SIP server.
Set parameters by reference to Table 2-1 and click "OK". The VTO reboots
automatically.
Parameter
IP Address
Port
Username/Password Use default value.
SIP Domain
Login
Password
VTO settings have been completed if the platform or another VTO works as SIP
server.
If this VTO works as SIP server, "VTO No. Management" and "Room No.
Management" appears in the left parameter tab. Please add VTO and VTH by
reference to "Step 9" and "Step 10".
(Optional) Login WEB interface again; select "Household Setting > VTO No.
Management".
The system displays "VTO No. Management" interface, as shown in Figure 2-9.
错误!使用"开始"选项卡将 Heading 1,l1,H1,Title1,Normal + Font: Helvetica,Bold,Space Before
12 pt,Not Bold,Heading One,h1,Head1,Head,1,Numbered,nu,Level 1 Head,1st level,Section He
ad,Sec1,h11,1st level1,h12,1st level2,h13,1st level3,h14,1st level4,h15,1st level5,h16,h17 11
Figure 2-8
Description
IP address of SIP server.
It is 5060 by default when another VTO works as
SIP server.
It is 5080 by default when the platform works as
SIP server.
It shall be VDP when another VTO works as SIP
server.
It can be null or keep default value when the
platform works as SIP server.
Username/
Username and password to login SIP server.
Table 2-1
Need help?
Do you have a question about the Digital VTH and is the answer not in the manual?