This manual introduces basic operations of the digital indoor monitor (hereinafter referred to as "VTH"). Models 2-wire VTH that supports Wi-Fi. Non 2-wire VTH that supports Wi-Fi. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words...
Page 3
About the Manual The manual is for reference only. Slight differences might be found between the manual and the product. We are not liable for losses incurred due to operating the product in ways that are not in compliance with the manual.
Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it, and keep the manual safe for future reference. Operation Requirements ●...
Structure The VTHs have the same front panel but differ in the ports in the rear panel. One supports 2- wire and the other does not. Front Panel Front panel Rear Panel (2-wire) Rear panel for 2-wire model...
Installation should be done by professional teams. Do not dismantle or repair the device by yourself in case of device failure. Contact after-sales service if you need any help. Wall-mounted Installation Directly install the VTH with a bracket onto a wall, which is suitable for all types of devices. Wall-mounted installation...
Make sure that there is no short or open circuit in the VTO and VTH. Plan IP and number (working as a phone number) for each VTO and VTH. Make sure that the VTH and VTO are on the network segment. For specific configuration of the VTO, please refer to the corresponding user’s manual.
Configuring Network Parameters You can choose to connect to the network either through WLAN or LAN. 3.3.1 WLAN a) Tap WireLessIP, enter local IP, subnet mask and gateway that you plan for the VTH, and then tap OK. b) Tap WireLessIP, tap to enable the DHCP function to obtain IP information automatically.
Configuring SIP Server SIP server SIP server Parameter Description When the platform works as SIP server, server IP is the IP address of the platform. Server IP When VTO works as SIP server, server IP is the IP address of the VTO.
Commissioning After the basic configuration is complete, check whether the intercom function can work. VTO Calling VTH Call VTH from VTO VTH Monitoring VTO A VTH can monitor VTO.
Cybersecurity Recommendations Mandatory actions to be taken for basic device network security: Use Strong Passwords Please refer to the following suggestions to set passwords: The length should not be less than 8 characters; Include at least two types of characters; character types include upper and lower ...
Page 20
We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them.
Need help?
Do you have a question about the VTH and is the answer not in the manual?
Questions and answers