Tilting The Stair Climbing System; Operation On Slopes - AAT c-max Translation Of The Original User Manual

6.8

Tilting the stair climbing system

To drive on slopes or to climb stairs you must tilt the
done easily by means of the climbers.
-max by pressing the ON/OFF switch.
C
1. Turn on the
2. Press the UP/DOWN switch direction DOWN until the climbers lift
the main wheels at least 1-2 cm off the floor (see picture).
3. Put your foot on the housing and tilt the
until you feel that the
-max is balanced if you feel neither pull nor push in the hand-
C
4. The
les.
5. In order to drive on level ground, the climbers must be pulled in enti-
rely
-max further, or too much, the safety brakes engage and the
C
If you tilt the
-max can't be moved forward any more.
C
6.9

Operation on slopes

To drive on a slope, make sure the handles are adjusted appropriately (see
chapter 6.7). Now tilt the
entirely (see chapter 6.8).
F
For safety reasons we recommend you to ask another person to assist
when driving on a slope.
6.9.1 Downhill
Drive forward to the edge of the slope. In order to slow down you need to tilt
-max a bit more, so that the safety brakes are activated.
C
the
6.9.2 Uphill
Please drive backwards up a slope. In order to slow down you need to tilt the
-max a bit more, so that the safety brakes are activated.
C
C
-max is balanced.
C
-max slightly backwards and pull in the climbers
C
-max, which can be
C
-max slightly toward you
23
c-max
160 kg