Preparation Before Operation - Daikin MCK55WVM Operation Manual

Read First

Preparation Before Operation

1
Checking accessories
Remote controller .... 1
Remote controller
holder ....................... 1
Casters .................... 4
2
Attaching the casters
1.
Before setting up, remove the fixing tape on
the bottom which is securing the power supply
cord, then take out the power supply cord.
Power supply cord
Fixing tape (blue)
2.
Reposition the unit so that the front of the
unit faces upward.
• The front may be scratched if faced downward.
• Be careful not to scratch the back of the unit with
the blades of the power supply plug.
3.
Tighten securely using the included screws
to prevent rattling.
Front (Unit)
Attention
• Do not use the lock levers while attaching the casters, as it may cause the wheels to detach.
• When moving the unit with the casters, be sure to move it slowly as floor surfaces may be scratched depending on the
flooring material.
• The unit should only be moved left or right as the casters are in a fixed position. Slow/gradual turning is also possible. Sharp
turns or moving the unit forward/backward on the casters should be avoided. In case such movement is necessary, first lift
the unit slightly up.
How to use
• There are 2 lock levers at left and right side.
Lock
11
Caster
Screw
Unlock
Lower the lock
lever to lock
Attachment orientation
• Attach the casters with locks to the corners at the front
of the unit.
Casters with locks
Casters without locks
Attach so that this side faces
toward the front of the unit
Please use your hands to operate the lock
Raise the lock
levers.
lever to unlock
Deodorising filter ................ 1
Attach to the unit before
operation.
Operation manual ............... 1
In the bottom of the packing
case.
Lock lever
(Viewed from below)
Attention