German pool WAC-407 User Manual page 8

Installation Instructions
1) Remove the front panel. (F ig.5)
Remove the air filter. (F ig.6)
Remove screw at the botton of the front panel. (F ig.7)
Open the panel cover.
2) Remove the screws fix the chassis-fixing board and cabinet.
Some models have two more screws on the back of the
cabinet. (F ig.8)
3) Grasp the handle on the front of the chassis and carefully
slide the air conditioner unit out of the cabinet. (F ig.9)
4) lnstall the drain tube connection into the hole provided
at the rear of the air conditioner chassis.(F ig.11)
(If applicable)
To meet different requirement of different type of air
conditioner, there are two kinds of method for your
choice to treat the condensed water. You can choose
back drainage or bottom drainage.
Bottom drainage :
four pcs of screws and use the flare nut to block the
back drainage hole.(F ig.15)
Back drainage using the flare nut to block the bottom :
,
drainage hole and use water outlet pipe to connect the
back drainage hole pay attention to increase the sealing
ring to prevent water leakage.(F ig.16)
5) lnstall the air conditioner cabinet on the installation shelf
(not included) with screws.(F ig.10)
6) C arefully slide the unit back into the cabinet.(F ig .12)
7) R einstall the retaining bracket,front panel and mounting
screws.(F ig.8,7,13)
8) R einstall the air filter.(F ig.14)
F ig.14
the drain tray is fixed in position through
,
,
F ig.11
drain tray
sc rew
F ig.12
F ig.15
flare nut
flare nut
P.8
F ig.5
F ig.6
F ig.7
F ig.8
F ig.9
W all
C abinet
Installation shelf
S crew
F ig.10
F ig.13
F ig.16
se aling ring
wa ter outlet pipe