Table of Contents
Advertisement
4.
Unlock the assembly and pivot it away from
the mower deck. Lift the Operator Controlled
Discharge accessory (and the adapter, if
applicable) out of the deck mounting tube.
5.
Lower the existing discharge deflector.
Important: Reinstall the original discharge
deflector if it was removed during the
Operator Controlled Discharge accessory
installation.
6.
The machine can now be used for side discharge
mowing.
After Operation
General Safety
• Park machine on level ground, disengage drives,
set parking brake, stop engine, remove key or
disconnect spark plug wire. Wait for all movement
to stop and allow the machine to cool before
adjusting, cleaning, repairing, or storing. Never
allow untrained personnel to service machine.
• Clean the machine as stated in the Maintenance
section.
• Frequently check for worn or deteriorating
components that could create a hazard. Tighten
loose hardware.
13
Operation
Advertisement
Table of Contents
