Operation; Emptying The Grass Bags; Clearing Obstructions From The Bagger - Exmark Quest 126-7506 Operator's Manual

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
Overall width of unit with bagger: 54.8 inches
(139 cm).
WARNING
To avoid personal injury, follow these
procedures:
• Become familiar with all operating and
safety instructions in the Operator's
Manual for the mower before using this
attachment.
• Never remove the discharge tube, bags,
bagger top, or the chute while the engine
is running.
• Always shut the engine off and wait for all
moving parts to stop before clearing an
obstruction from the bagging system.
• Never do maintenance or repairs while the
engine is running.

Emptying the Grass Bags

Be careful when lifting or handling a grass bag that is
full. To empty the grass bags:
1. Park the machine on a level surface and
disengage the blade control switch.
2. Stop the engine, remove the key, set the parking
brake and wait for all moving parts to stop before
leaving the operating position.
3. Open (raise) the bagger top
4. Compress debris into the bags. With both
hands, lift up on the bag and unhook it from the
retaining bracket. Empty the bag. Repeat the
procedure for the other bag.
(Figure 29).
Figure 29
5. Install the bags by sliding the bag frame hooks
onto the retaining brackets
1. Bag
2. Bagger frame
6. Lower the bagger top onto the bags.
Clearing Obstructions from
the Bagger
1. Park the machine on a level surface and
disengage the blade control switch.
2. Move the motion control levers outward to the
neutral lock position, stop the engine, remove
the key, set the parking brake and wait for
all moving parts to stop before leaving the
operating position.
3. Check the grass bags and empty them if they
are full.
g207340
4. Remove and separate the discharge tube and
chute from the bagger top and mower. Using
a stick or similar object, carefully remove and
clear the obstruction from the mower, discharge
tube, chute, and the bagger top.
5. After you remove the obstruction, install the
complete bagger system and resume operation.
16
(Figure 30).
Figure 30
3. Retaining bracket
4. Bag frame hook
g028327